TheorySolar Heating Installer Prep Practice Test Video
Watch the Solar Heating Installer Prep practice test video walkthrough, review the questions, download the free PDF and start an online mock exam.
Solar Heating Installer Prep exam — full Q&A walkthrough
Every question read aloud with the answer explained. Play it on your commute, then test yourself.
Try Solar Heating Installer Prep questions now
Q1Which step should be performed first when commissioning a newly installed solar heating system?
Show answer
✓ Correct answer: Pressure test the system for leaks
Pressure testing the system is the first critical step in commissioning to ensure there are no leaks before introducing the heat transfer fluid and operating the system.
Q2What is the primary purpose of verifying flow rates during solar heating system commissioning?
Show answer
✓ Correct answer: To ensure proper heat transfer from collectors to storage
Verifying flow rates ensures proper heat transfer from the collectors to the storage tank, which is essential for system efficiency and performance.
Q3When programming a differential temperature controller during commissioning, what is the typical collector-to-tank temperature differential setting to activate the pump?
Show answer
✓ Correct answer: 8-10°F
A differential of 8-10°F is typically used to activate the pump, providing enough temperature difference to ensure efficient heat transfer while preventing short cycling.
Q4Which document should be completed and provided to the customer during the final walk-through of a newly commissioned solar heating system?
Show answer
✓ Correct answer: System owner's manual with operation instructions
The system owner's manual contains essential information about operation, maintenance, and troubleshooting that the customer needs to properly use and maintain their solar heating system.
Q5What should an installer check when verifying sensor placement during system commissioning?
Show answer
✓ Correct answer: Proper contact with the surface and secure attachment
Proper contact and secure attachment ensure accurate temperature readings, which are critical for system control and performance monitoring.
Q6During commissioning, what is the purpose of running the circulation pump manually?
Show answer
✓ Correct answer: To verify proper pump operation and system circulation
Running the pump manually allows the installer to check for proper operation, unusual noises, vibration, leaks, and ensures the fluid is circulating correctly through the entire system.
Full Solar Heating Installer Prep bank + unlimited mocks
Try 30 questions free. Unlock the complete Solar Heating Installer Prep question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock Solar Heating Installer Prep →