TheoryJourneyman Plumber 2 Study Guide
Study for the Journeyman Plumber 2 with exam topics, practice questions, a free PDF, video walkthrough and timed mock exam links.
How to study for Journeyman Plumber 2
- Read the topic list so you know what the exam is likely to cover.
- Answer the free practice questions and read every explanation.
- Download the PDF for offline review.
- Use timed mock exams when your untimed practice feels comfortable.
Topics to review
- Core formulas and field calculations
- Codes, standards and compliance
- Safe work practices and PPE
- Tools, materials and on-site reference
Try Journeyman Plumber 2 questions now
Q1What is the definition of 'backflow' in a plumbing system?
Show answer
✓ Correct answer: The reversal of normal flow direction in a piping system
Backflow is the undesirable reversal of flow in a piping system, which can allow contaminants to enter the potable water supply. Understanding this basic definition is foundational to cross-connection control.
Q2A cross-connection is best defined as which of the following?
Show answer
✓ Correct answer: Any physical link between a potable water system and any source of contamination
A cross-connection is any actual or potential link between the potable water supply and any source of pollution or contamination. Eliminating or protecting cross-connections is the goal of cross-connection control programs.
Q3Which term describes backflow caused by the downstream pressure exceeding the supply pressure?
Show answer
✓ Correct answer: Backpressure backflow
Backpressure backflow occurs when downstream pressure becomes greater than the supply (system) pressure, forcing contaminants backward into the potable supply. This can happen in boiler systems, pumped systems, or elevated piping.
Q4Back-siphonage is caused by which condition in the water supply system?
Show answer
✓ Correct answer: Negative pressure (vacuum) in the supply line
Back-siphonage is the backflow of potentially contaminated water caused by a negative pressure (partial vacuum) in the supply piping, similar to the siphon effect. It can occur during water main breaks or high-demand events.
Q5Which of the following correctly distinguishes a pollutant from a contaminant in cross-connection control?
Show answer
✓ Correct answer: A pollutant degrades water quality but may not pose an immediate health hazard, while a contaminant poses a direct health hazard
In cross-connection control, a pollutant creates an aesthetic nuisance or low-degree hazard (e.g., mineral deposits), whereas a contaminant creates an actual health hazard (e.g., pesticides, sewage). This distinction drives the level of backflow protection required.
Q6When classifying cross-connections, a 'high-hazard' connection involves which type of substance?
Show answer
✓ Correct answer: Substances that are toxic, pathogenic, or otherwise harmful to human health
A high-hazard cross-connection involves a substance that is toxic, pathogenic, or otherwise dangerous to health (e.g., chemicals, sewage). High-hazard connections require a higher degree of protection such as an air gap or reduced pressure principle (RP) assembly.
Full Journeyman Plumber 2 bank + unlimited mocks
Try 30 questions free. Unlock the complete Journeyman Plumber 2 question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock Journeyman Plumber 2 →