TheoryCrane Operator NCCCO Study Guide
Study for the Crane Operator NCCCO with exam topics, practice questions, a free PDF, video walkthrough and timed mock exam links.
How to study for Crane Operator NCCCO
- Read the topic list so you know what the exam is likely to cover.
- Answer the free practice questions and read every explanation.
- Download the PDF for offline review.
- Use timed mock exams when your untimed practice feels comfortable.
Topics to review
- Work health & safety law and duty of care
- Spotting site hazards and controlling risk
- Personal protective equipment (PPE)
- Emergency procedures and incident reporting
Try Crane Operator NCCCO questions now
Q1When must a pre-shift inspection of a crane be performed?
Show answer
✓ Correct answer: Before each shift during which the crane will be used
ASME B30.5 and OSHA 1926.1412 require a visual inspection before each shift the equipment is to be used. This ensures any damage or defect that occurred since the last use is caught before operations begin.
Q2Which of the following is included in a pre-shift (frequent) inspection of a mobile crane?
Show answer
✓ Correct answer: Visual inspection of all control mechanisms for proper operation
Pre-shift (frequent) inspections include visual checks of control mechanisms, wire rope, hooks, and safety devices. Disassembly, load testing, and non-destructive testing (NDT) are part of periodic inspections.
Q3Who is responsible for conducting the pre-shift inspection of a crane?
Show answer
✓ Correct answer: A qualified/competent person or the operator
OSHA 1926.1412 specifies that equipment must be inspected by a qualified person or, for the pre-shift visual inspection, by the operator prior to use each shift.
Q4During a pre-shift inspection, the operator finds that the load line anti-two-block device is not functioning. What is the correct action?
Show answer
✓ Correct answer: Remove the crane from service until the device is repaired
Anti-two-block devices are required safety devices. OSHA 1926.1416 states that if a required safety device is not functioning, the equipment must be taken out of service until repaired. Operating with a substitute measure does not satisfy the regulation.
Q5What condition of wire rope requires it to be immediately removed from service?
Show answer
✓ Correct answer: Six randomly distributed broken wires in one rope lay
ASME B30.5 specifies removal criteria including six randomly distributed broken wires in one lay length or three broken wires in one strand in one lay. Lubrication and minor oxidation are normal; small diameter variance within tolerance is acceptable.
Q6A mobile crane wire rope shows a reduction in diameter of 1/64 inch from its nominal diameter of 3/4 inch. What should the operator do?
Show answer
✓ Correct answer: Remove the rope from service immediately
ASME B30.5 requires removal from service if the wire rope diameter has decreased more than 1/64 inch from nominal for ropes up to 3/4 inch diameter. A 1/64-inch reduction on a 3/4-inch rope is exactly at the removal threshold.
Full Crane Operator NCCCO bank + unlimited mocks
Try 30 questions free. Unlock the complete Crane Operator NCCCO question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock Crane Operator NCCCO →