TheorySHSI Test Prep Study Guide
Study for the SHSI Test Prep with exam topics, practice questions, a free PDF, video walkthrough and timed mock exam links.
How to study for SHSI Test Prep
- Read the topic list so you know what the exam is likely to cover.
- Answer the free practice questions and read every explanation.
- Download the PDF for offline review.
- Use timed mock exams when your untimed practice feels comfortable.
Topics to review
- Hazard identification and risk control
- Required workplace procedures
- Personal protective equipment and safe practice
- Compliance, reporting and documentation
Try SHSI Test Prep questions now
Q1When inspecting a solar water heating system with potable water connections, which device is required to prevent backflow of heat transfer fluid into the potable water supply?
Show answer
✓ Correct answer: Backflow prevention device
A backflow prevention device is required by plumbing codes to prevent non-potable heat transfer fluid from contaminating the potable water supply in case of a pressure difference that could cause reverse flow.
Q2During inspection of a solar water heating system, what is the primary purpose of a temperature and pressure relief valve on the storage tank?
Show answer
✓ Correct answer: To prevent tank rupture by releasing water when temperature or pressure exceeds safe limits
The temperature and pressure relief valve is a critical safety device that prevents excessive pressure or temperature buildup in the storage tank by releasing water when either parameter exceeds safe limits.
Q3When inspecting a thermosiphon solar water heating system with potable water, what must an inspector verify about the temperature and pressure relief valve?
Show answer
✓ Correct answer: That it discharges to a safe location according to local code requirements
Code requirements specify that the T&P relief valve must discharge to an appropriate location where it won't cause property damage or create a scalding hazard to people.
Q4What type of heat exchanger is typically required when separating potable water from toxic heat transfer fluid in a solar water heating system?
Show answer
✓ Correct answer: Double-wall heat exchanger with visible leak path
Double-wall heat exchangers with a visible leak path between the walls provide an additional layer of protection against cross-contamination of potable water with toxic heat transfer fluid.
Q5According to plumbing codes, what is the maximum temperature at which potable water should be delivered to fixtures in a solar water heating system?
Show answer
✓ Correct answer: 120°F (49°C)
To prevent scalding, plumbing codes typically specify that water delivered to fixtures should not exceed 120°F (49°C), which is ensured by properly installed mixing valves.
Q6When inspecting a solar water heating system's potable water connections, which valve should be present to allow maintenance of the solar system without shutting down the entire building's water supply?
Show answer
✓ Correct answer: Isolation valves
Isolation valves are required to allow service and maintenance of the solar heating system components without interrupting water service to the rest of the building.
Full SHSI Test Prep bank + unlimited mocks
Try 30 questions free. Unlock the complete SHSI Test Prep question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock SHSI Test Prep →