TheoryPVIS Test Prep Practice Test Video
Watch the PVIS Test Prep practice test video walkthrough, review the questions, download the free PDF and start an online mock exam.
PVIS Test Prep exam — full Q&A walkthrough
Every question read aloud with the answer explained. Play it on your commute, then test yourself.
Try PVIS Test Prep questions now
Q1What is the primary purpose of an Arc Flash Hazard Analysis for PV installations?
Show answer
✓ Correct answer: To determine the appropriate PPE requirements for workers
An Arc Flash Hazard Analysis is conducted to determine the potential incident energy levels workers might be exposed to, which then informs the appropriate PPE requirements for electrically safe work practices. This is critical for preventing serious injuries during PV system installations.
Q2According to OSHA standards, at what height is fall protection required for workers installing rooftop PV systems?
Show answer
✓ Correct answer: 6 feet or more
OSHA requires fall protection for construction workers at heights of 6 feet or more above a lower level. This includes PV installers working on rooftops, who must use appropriate fall arrest systems or other protective measures.
Q3Which of the following is the most appropriate safety measure when working with batteries in a PV system?
Show answer
✓ Correct answer: Wear safety goggles and chemical-resistant gloves
Batteries contain corrosive chemicals that can cause chemical burns or eye damage. Safety goggles and chemical-resistant gloves provide essential protection when handling batteries to prevent these injuries.
Q4What should be included in a job hazard analysis (JHA) for a PV installation site?
Show answer
✓ Correct answer: Identification of hazards, risk assessment, and control measures
A proper JHA should identify potential hazards, evaluate their risks, and determine appropriate control measures to mitigate those risks. This comprehensive approach ensures that safety protocols are tailored to the specific conditions of each installation site.
Q5When using a ladder to access a roof for PV installation, what is the proper placement angle?
Show answer
✓ Correct answer: A 4:1 ratio (the base should be 1 foot out for every 4 feet of height)
The proper ladder angle follows the 4-to-1 rule: for every 4 feet of height, the base of the ladder should be 1 foot away from the wall or structure. This provides optimal stability and reduces the risk of the ladder tipping or sliding.
Q6What is the minimum approach distance for unqualified workers to exposed energized parts operating at 480 volts?
Show answer
✓ Correct answer: 10 feet
OSHA requires unqualified workers to maintain at least 10 feet of distance from exposed energized parts operating at 480 volts. This distance helps prevent electrical shock or arc flash injuries to workers who lack the training to work safely with high-voltage equipment.
Full PVIS Test Prep bank + unlimited mocks
Try 30 questions free. Unlock the complete PVIS Test Prep question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock PVIS Test Prep →