TheoryMotorcycle Permit 26 Practice Questions
Free Motorcycle Permit 26 practice questions with answers and plain-English explanations. Browse the PDF, video and online mock test.
Motorcycle Permit 26 Questions
Open each answer, read the explanation, then continue into the full practice flow.
Q1You are shopping for a motorcycle helmet and find one labeled 'novelty helmet' at a significantly lower price. What does this label indicate about its protective value?
Show answer
✓ Correct answer: It has not been tested or certified to DOT safety standards and offers minimal impact protection
Novelty helmets are not DOT-certified and lack the energy-absorbing liner required by the standard, meaning they provide little to no meaningful protection in a crash.
Q2During T-CLOCS, you squeeze the front brake lever and it travels all the way to the handlebar grip before resistance builds. What does this indicate, and what should you do?
Show answer
✓ Correct answer: There is likely air in the brake line or insufficient fluid; the motorcycle should not be ridden until serviced
A brake lever that travels to the grip without firm resistance indicates a hydraulic failure — typically air in the line or low fluid — which can result in complete brake loss; riding in this condition is unsafe.
Q3A rider wears a full-face helmet with a cracked outer shell from a previous minor drop. The padding inside appears intact. Is this helmet safe to use?
Show answer
✓ Correct answer: No, any crack in the outer shell compromises the helmet's ability to distribute impact forces and it must be replaced
The outer shell works together with the inner liner to absorb and distribute impact energy; a cracked shell is structurally compromised and the helmet must be replaced regardless of how the interior looks.
Q4Which of the following best describes the minimum acceptable eye protection when riding a motorcycle that has NO windshield?
Show answer
✓ Correct answer: A face shield or goggles that meet ANSI Z87.1 impact standards
The operator manual specifies that eye protection must be impact-resistant and wind-sealing; a face shield or goggles meeting impact standards fulfill this requirement, while standard eyeglasses and sunglasses do not seal against wind or flying debris.
Q5While checking tire pressure during T-CLOCS on a cool morning, you find the front tire is 4 PSI below the manufacturer's recommended cold inflation. You plan to ride 45 minutes to a shop. What is the safest course of action?
Show answer
✓ Correct answer: Inflate the tire to the correct cold pressure before riding, then recheck after the trip
Tires should always be inflated to the manufacturer's recommended cold pressure before riding; under-inflation causes poor handling and excessive heat buildup, and you should never ride with a known pressure deficiency you can correct.
Q6What is the purpose of the 'C' step in the T-CLOCS pre-ride inspection checklist?
Show answer
✓ Correct answer: Inspect controls — levers, pedals, cables, throttle, and handlebars for proper operation
In T-CLOCS, 'C' stands for Controls, which includes checking all levers, pedals, throttle free-play and snap-back, cables for fraying, and handlebar movement to ensure proper mechanical function before riding.
Q7You grab the front fork tubes and push the motorcycle forward and backward while applying the front brake. You feel a clunking movement in the steering head. What does this indicate?
Show answer
✓ Correct answer: Loose or worn steering head bearings that need immediate service
Clunking or looseness felt at the steering head when rocking the motorcycle under braking indicates worn or loose steering head bearings, which compromise steering precision and stability and must be serviced before riding.
Q8A rider chooses leather gauntlet-style gloves over short cuff gloves for highway riding. What is the primary safety advantage of the gauntlet design?
Show answer
✓ Correct answer: They cover the wrist and lower forearm, preventing gloves from being pulled off in a slide and protecting additional skin area
Gauntlet-style gloves extend over the wrist and lower forearm so they cannot be ripped away during a slide, protecting a larger skin area and preventing the glove from inverting off the hand on impact.
Q9When inspecting motorcycle footwear, which feature is MOST important for crash protection according to the operator manual?
Show answer
✓ Correct answer: Non-slip rubber soles and ankle coverage above the ankle bone
The manual recommends sturdy footwear that covers and supports the ankle; non-slip soles help maintain foot peg grip and ankle coverage protects against abrasion and twisting injuries in a fall.
Q10During the 'L' (Lights) portion of T-CLOCS, you discover the high-beam indicator works but the low beam does not illuminate. What is the correct action before riding at night?
Show answer
✓ Correct answer: Repair or replace the low beam before riding at night, as a functioning headlight is legally required and essential for visibility
A motorcycle's low-beam headlight is both legally required and critical for being seen at night; riding without a functioning low beam is illegal in all states and dramatically reduces both the rider's visibility and conspicuity to others.
Full Motorcycle Permit 26 bank + unlimited mocks
Try 30 questions free. Unlock the complete Motorcycle Permit 26 question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock Motorcycle Permit 26 →