Video walkthrough · Specialist HSE Exam Prep UK

Specialist HSE Exam Prep UK Practice Test Video

Watch the Specialist HSE Exam Prep UK practice test video walkthrough, review the questions, download the free PDF and start an online mock exam.

Free sample · Specialist HSE Exam Prep UKQ1
What is the minimum class rating required for a safety helmet to be used on a construction site in the UK?
Correct — D. Safety helmets used on construction sites must meet EN 397 standard as a minimum. This ensures adequate protection against falling objects and impact.
↑ Tap an answer to check it
Watch & learn

Specialist HSE Exam Prep UK exam — full Q&A walkthrough

Every question read aloud with the answer explained. Play it on your commute, then test yourself.

Sample questions

Try Specialist HSE Exam Prep UK questions now

  1. Q1What is the minimum class rating required for a safety helmet to be used on a construction site in the UK?

    Show answer

    ✓ Correct answer: EN 397

    Safety helmets used on construction sites must meet EN 397 standard as a minimum. This ensures adequate protection against falling objects and impact.

    Open the full explanation page →

  2. Q2How often should Class 3 safety harnesses be inspected by a competent person?

    Show answer

    ✓ Correct answer: Every six months

    Class 3 safety harnesses must be formally inspected by a competent person every six months, in addition to daily pre-use checks by the user.

    Open the full explanation page →

  3. Q3Which type of fire extinguisher should NEVER be used on a chip pan fire?

    Show answer

    ✓ Correct answer: Water

    Water extinguishers must never be used on cooking oil or chip pan fires as the water will cause the burning oil to explode and spread, creating a much larger fire hazard.

    Open the full explanation page →

  4. Q4What voltage is the standard requirement for portable electrical tools on UK construction sites?

    Show answer

    ✓ Correct answer: 110 volts

    110 volts centre-tapped to earth (55V to earth) is the standard for portable tools on construction sites as it significantly reduces the risk of fatal electric shock.

    Open the full explanation page →

  5. Q5What does a yellow PAT testing label on electrical equipment indicate?

    Show answer

    ✓ Correct answer: 110 volt equipment

    A yellow PAT testing label indicates that the equipment is rated at 110 volts, which is the standard voltage for portable equipment on construction sites.

    Open the full explanation page →

  6. Q6What is the maximum safe angle for leaning a ladder against a wall using the 1:4 rule?

    Show answer

    ✓ Correct answer: 75 degrees

    The 1:4 rule means the base of the ladder should be 1 unit out for every 4 units up, creating an angle of approximately 75 degrees from the horizontal for safe and stable use.

    Open the full explanation page →

Unlock everything

Full Specialist HSE Exam Prep UK bank + unlimited mocks

Try 30 questions free. Unlock the complete Specialist HSE Exam Prep UK question bank, every explanation, and unlimited timed mock exams. Practice on any device.

Unlock Specialist HSE Exam Prep UK →
Cramming?
$2.99
/ week · per exam
Best value
$6.99
/ month · per exam