TheoryFree HSE Specialist Safety Prep Practice Test PDF
Download a free HSE Specialist Safety Prep practice test PDF with 30 questions, answers and explanations, then continue with online mock exams.
Free HSE Specialist Safety Prep PDF with 30 questions
Print it, save it, or use it as a quick cram sheet before taking a timed mock exam.
Download PDF
The PDF includes 30 HSE Specialist Safety Prep questions with answers and explanations.
Try HSE Specialist Safety Prep questions now
Q1What is the minimum class rating required for a safety helmet to be used on a construction site in the UK?
Show answer
✓ Correct answer: EN 397
Safety helmets used on construction sites must meet EN 397 standard as a minimum. This ensures adequate protection against falling objects and impact.
Q2How often should Class 3 safety harnesses be inspected by a competent person?
Show answer
✓ Correct answer: Every six months
Class 3 safety harnesses must be formally inspected by a competent person every six months, in addition to daily pre-use checks by the user.
Q3Which type of fire extinguisher should NEVER be used on a chip pan fire?
Show answer
✓ Correct answer: Water
Water extinguishers must never be used on cooking oil or chip pan fires as the water will cause the burning oil to explode and spread, creating a much larger fire hazard.
Q4What voltage is the standard requirement for portable electrical tools on UK construction sites?
Show answer
✓ Correct answer: 110 volts
110 volts centre-tapped to earth (55V to earth) is the standard for portable tools on construction sites as it significantly reduces the risk of fatal electric shock.
Q5What does a yellow PAT testing label on electrical equipment indicate?
Show answer
✓ Correct answer: 110 volt equipment
A yellow PAT testing label indicates that the equipment is rated at 110 volts, which is the standard voltage for portable equipment on construction sites.
Q6What is the maximum safe angle for leaning a ladder against a wall using the 1:4 rule?
Show answer
✓ Correct answer: 75 degrees
The 1:4 rule means the base of the ladder should be 1 unit out for every 4 units up, creating an angle of approximately 75 degrees from the horizontal for safe and stable use.
Full HSE Specialist Safety Prep bank + unlimited mocks
Try 30 questions free. Unlock the complete HSE Specialist Safety Prep question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock HSE Specialist Safety Prep →