TheoryFree CDL Class a Practice Test PDF
Download a free CDL Class A practice test PDF with 30 questions, answers and explanations, then continue with online mock exams.
Free CDL Class A PDF with 30 questions
Print it, save it, or use it as a quick cram sheet before taking a timed mock exam.
Download PDF
The PDF includes 30 CDL Class A questions with answers and explanations.
Try CDL Class A questions now
Q1During a pre-trip inspection, which component should you check for cracks, missing bolts, and proper mounting?
Show answer
✓ Correct answer: Coupling device (fifth wheel)
The CDL manual requires you to inspect the fifth wheel for cracks, broken or missing parts, and to verify it is properly mounted and locked before every trip.
Q2What is the correct order to begin the 7-step pre-trip inspection?
Show answer
✓ Correct answer: Approach the vehicle, look for leaks and damage from a distance, then check the engine compartment
Step 1 of the 7-step inspection is to approach and do an overview of the vehicle from a distance, looking for obvious damage, leaks, or tilting before moving closer.
Q3During a pre-trip inspection of the engine compartment, which fluid level does the CDL manual specifically require you to check?
Show answer
✓ Correct answer: Engine oil level
The CDL manual requires checking engine oil level as part of the engine compartment inspection; it must be at the proper level with no signs of leaks.
Q4How many steps are in the standard CDL 7-step pre-trip inspection procedure?
Show answer
✓ Correct answer: 7
The standard FMCSA/AAMVA CDL manual defines exactly 7 steps for the pre-trip vehicle inspection, covering everything from vehicle overview to signal and brake checks.
Q5While driving, your low air pressure warning light and buzzer activate. According to the CDL manual, at approximately what air pressure does this warning typically trigger?
Show answer
✓ Correct answer: 60 psi
The CDL manual states the low air pressure warning device must activate before pressure drops below 60 psi, signaling the driver to stop safely and not continue driving.
Q6During an en-route inspection stop, you notice one of your drive axle tires has a tread depth measuring 2/32 of an inch. What action is required?
Show answer
✓ Correct answer: You may continue; the minimum for drive axles is 2/32 inch
Federal regulations require a minimum tread depth of 4/32 inch on front axle tires and all drive axle tires; 2/32 inch is only the minimum for other positions, so a drive axle at 2/32 is an out-of-service condition.
Full CDL Class A bank + unlimited mocks
Try 30 questions free. Unlock the complete CDL Class A question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock CDL Class A →