TheoryASE B3 Auto Body Exam Prep Practice Test Video
Watch the ASE B3 Auto Body Exam Prep practice test video walkthrough, review the questions, download the free PDF and start an online mock exam.
ASE B3 Auto Body Exam Prep exam — full Q&A walkthrough
Every question read aloud with the answer explained. Play it on your commute, then test yourself.
Try ASE B3 Auto Body Exam Prep questions now
Q1A vehicle has a small crack at the edge of the windshield. Technician A says this crack can be repaired with a special resin. Technician B says any crack in the driver's primary viewing area should result in windshield replacement. Who is right?
Show answer
✓ Correct answer: Both A and B
A crack at the edge of the windshield (outside the primary viewing area) can often be repaired with a special resin. However, cracks in the driver's primary viewing area typically require windshield replacement for safety reasons.
Q2What must be done before removing an electrically heated rear window?
Show answer
✓ Correct answer: Disconnect the electrical connections
Disconnecting electrical connections is essential before removing a heated rear window to prevent damage to the electrical heating elements and wiring.
Q3When installing a new door window, technician A says to check for proper window track alignment. Technician B says to adjust the window stop to prevent the window from going too high. Who is right?
Show answer
✓ Correct answer: Both A and B
Both technicians are correct. Window track alignment ensures smooth operation, while proper adjustment of window stops prevents the window from being raised too high, which could damage the glass or mechanism.
Q4A vehicle's power window operates slowly and makes a grinding noise when closing. The most likely cause is:
Show answer
✓ Correct answer: Damaged window regulator
A damaged regulator is the most likely cause of a window that operates slowly and makes grinding noises, as the mechanical components that raise and lower the glass are worn or damaged.
Q5During windshield replacement, what is the purpose of applying primer to the pinchweld?
Show answer
✓ Correct answer: To promote adhesion and provide UV protection
Primer is applied to the pinchweld to promote adhesion between the urethane adhesive and the vehicle body, and to provide UV protection to prevent degradation of the adhesive bond.
Q6After replacing a windshield with ADAS features, what should be performed before returning the vehicle to the customer?
Show answer
✓ Correct answer: ADAS system calibration
After replacing a windshield with ADAS (Advanced Driver Assistance Systems) features, system calibration must be performed to ensure proper operation of safety systems like forward collision warning or lane departure warning.
Full ASE B3 Auto Body Exam Prep bank + unlimited mocks
Try 30 questions free. Unlock the complete ASE B3 Auto Body Exam Prep question bank, every explanation, and unlimited timed mock exams. Practice on any device.
Unlock ASE B3 Auto Body Exam Prep →